Tounge-Tite® Screws
Tounge-Tite®
- The ultimate screw for tongue and groove floorboards
- Small diameter countersunk head with Torx T-10 recess
- TRI-LOCK™  TS threadform reduces surface contact when driving in
- Hardened and NET-COAT™  yellow plated for corrosion protection
- TS thread profile provides benefits of both single and twin thread design
- One size only (3.5 x 45mm) suitable for most popular floorboards currently available
- Can be removed for access
- Two free driver bits in every box
- nsert at 30° to exposed face on tongue side where tongue and face intersect
- Drive through board into substrate
- Ensure head is below surface to prevent interference with next board
- Fit screw every 300mm
- If within 50mm of board end pre drill hole to prevent splitting
| Product Code | Diameter mm | Length mm | Unit Qty |
|---|---|---|---|
| 232-100-015 | 3.5 | 45 | 200 |
Tounge-Tite® Plus
-
- The ultimate screw for tongue and groove floorboards
- Small diameter countersunk head with Torx T-10 recess
- TRI-LOCK™  TS threadform reduces surface contact when driving in
- Hardened and NET-COAT™  yellow plated for corrosion protection
- TS thread profile provides benefits of both single and twin thread design
- One size only (3.5 x 45mm) suitable for most popular floorboards currently available
- Can be removed for access
- Two free driver bits in every box
Installation
- Insert at 30° to exposed face on tongue side where tongue and face intersect
- Drive through board into substrate
- Ensure head is below surface to prevent interference with next board
- Fit screw every 300mm
- If within 50mm of board end pre drill hole to prevent splitting
| Product Code | Diameter mm | Length mm | Unit Qty |
|---|---|---|---|
| 232-100-030 | 3.5 | 45 | 200 |